Contact unit
The charging station is supplied with one contact unit used to make the electrical connection with the charging platform when the drone is stationing on it
Figure 7 - BOLOGNINI S1 contact unit
Contact unit adjustments
Depending on your drone model, you may need to make some adjustments to the wire and connector.
Contact unit installation
To install the contact unit, follow these steps:
- unpack the contact unit;
- connect the contact unit cable to the charge sink;
- firmly fix the contact unit to your drone/mobile robot by using the provided adjustable mount, or your own mount. Make sure that the contact block is positioned correctly.
Figure 8 – BOLOGNINI S1 contact unit connected to charge sink
Figure 9 – BOLOGNINI S1 contact unit fixed to the drone landing gear (DJI Mavic 2)
Contact unit installation
The contact unit contacts must always physically touch the charging platform when the drone is on the charging platform. We recommend periodically verifying the correct positioning of the contact unit.
Congratulations
Now that you installed the Skycharge system and the contact solution, you can head over to the user's manual, which will guide you through how to power on the system and start operating it.
Updated about 3 years ago